Subject: Re: Models to ARC
From: "Submissions for ARC" <[email-masked]>
To: "Yuen Paolo" <[email-masked]>
Date: Sun, 26 Jan 2014 22:56:09 -0800

Hi,
I just wanted to let you know your article went on ARC today.  Thanks again for sending it in.

Steve Bamford
ARC Air - Aircraft Resource Center
http://www.arcair.com

Live like there is no tomorrow;
Love like you've never been hurt.
Work like you don't need the money.
Dance like nobody's watching.
Sing like nobody's listening.
Live like it's Heaven on Earth.

  ----- Original Message ----- 
  From: Yuen Paolo 
  To: [email-masked] 
  Sent: Friday, January 10, 2014 9:13 AM
  Subject: Models to ARC

  "1/350 Bronco Models USS New York LPD-21" 

  by "Paolo Yuen" 

  Please include your ARC Discussion Forum Name with your submission 
  -------------------- 

        Steve Bamford will insert full sized version of photo 01.jpg here  

  This is Bronco's LPD - 21, the model is easy to made but without most of the detailed on the superstructure, all of the door, hatch and hose wheel are missed. The air wings, Helicopters and Hummer are very nice detailed, before assemble them must ready a bed, because the parts are small after made have to take break for yours eyes!

        Steve Bamford will insert a click-able smaller version of photo 03.jpg here.  Clicking on that photo will bring up the full sized version of photo 03.jpg Steve Bamford will insert a click-able smaller version of photo 04.jpg here.  Clicking on that photo will bring up the full sized version of photo 04.jpg Steve Bamford will insert a click-able smaller version of photo 05.jpg here.  Clicking on that photo will bring up the full sized version of photo 05.jpg Steve Bamford will insert a click-able smaller version of photo 06.jpg here.  Clicking on that photo will bring up the full sized version of photo 06.jpg 

  The main problem for this ship is assemble the upper superstructures to the hull don't know why upper parts are larger than the lower after assemble have a "step" have to used epoxy putty to fill and made re do the shape again. Front window bridge had to do something when put the clear parts(window) it was blocked by the superstructures, have to cut out the cockpit plastic parts to let the front window see through, also can put lighting there!, I had put 5 LEDS to lighting the model, too
  The models was used the box provided photetch, only i used aftermarket water weight door..

        Steve Bamford will insert full sized version of photo 02.jpg here  

  You can add the final 1/3 of your text here.

  "Paolo Yuen"